Tight Buffer Distribution Plenum Fiber Optic Cable, Multimode, OM1, Corning Fiber, Indoor

• 900um Tight Buffers
• Water blocking aramid yarn strength members
• OFNP(Plenum) Rated Construction
• Exclusive use of Corning™ optical fibers
• Jacket print ensures product identification and fiber compatibility
• Buffers strip consistently between 3.5 - 5 lbs-f, helpful for onsite termination
• Durable jacket offers added protection during installation and in rugged use applications

Applications

• General indoor applications.
• Trunk cable between floors
• Data centers

Spec Sheet

Temperature Range

• Storage Temperature: -40ºC to +70ºC
• Operating Temperature: -40ºC to +70ºC

Cable Characteristics

• Fiber Count: 2 Fiber Strands
• Outer Jacket Material: Flame Retardant PVC
• Outer Jacket Color: Orange
• Strength Member: Aramid Yarn
• Tight Buffer Material: Flame Retardant PVC
• Tight Buffer Color: Available in 12 TIA/EIA Color Standards

Mechanical Characteristics

• Nominal Outer Diameter: 2 Strand: 4.4mm
• Minimum Bend Radius (Installation): 2 Starnd: 6.6cm
• Minimum Bend Radius (Operation): 2 Strand: 4.4cm

Optical Characteristics

• Core Size: 62.5um
• Wavelength: (850/ 1300) nm
• Max. Attenuation: (3.5/ 1.5) dB/ km
• Bandwidth (EMB) (High Performance): 4700 MHz @850nm
• Link Length (10Gb/ s): 550 mtr

Multi-Mode cable commonly has a diameter in the 50-to-100 micron range (typical multimode fiber core diameters are 50 or 62.5 micrometers). Multimode fiber gives you high bandwidth at high speeds (10 to 100MBS - Gigabit to 275m to 2km) over medium distances. Light waves are dispersed into numerous paths, or modes, as they travel through the cable's core typically 850 or 1300nm. However, in long cable runs (greater than 3000 feet [914.4 meters), multiple paths of light can cause signal distortion at the receiving end, resulting in an unclear and incomplete data transmission so designers now call for single mode fiber in new applications using Gigabit and beyond.